الشركة المصنعة والمصنعة في الصين RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller | Hfsinopower.com
آخر

Industrial auxiliary equipment

وطن

Industrial auxiliary equipment

RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller

RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller
RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller
RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller
RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller

RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller

Product introduction

The RCH-200E1JA chiller has a cooling capacity of 705 kW (200 RT) and a standard-condition chilled-water outlet temperature of 7°C. The unit adopts two liquid-suspended variable-frequency centrifugal compressors, a falling-film / flooded evaporator, and a shell-and-tube condenser. The COP is 6.32 and the IPLV is 8.86. The power supply is 380 V, 3-phase, 50 Hz; the starting current is 2 A, the rated current is 171 A, and the maximum current is 197 A. The water-side design pressure is 1.0 MPa. Both the evaporator and condenser water connections are DN150. The overall dimensions are 4185 × 1810 × 1980 mm, and the operating weight is 4050 kg. The parameters are based on the standard conditions of GB/T 18430.1-2024, and the energy-efficiency evaluation is based on GB 19577-2024.

منتجات جديدة
  • تفاصيل المنتج

Product Description

RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller

The RCH-200E1JA is a 200 RT (705 kW) liquid-suspended variable-frequency centrifugal chiller. It uses two liquid-suspended variable-frequency centrifugal compressors and achieves a COP of 6.32 and an IPLV of 8.86 under standard conditions. It is suitable for centralized cooling applications that require part-load efficiency and operating modulation.

Key Advantages:

  1. Zero Friction, Oil-Free & High Efficiency

  2. 15% Minimum Load, High Efficiency Across All Conditions

  3. 100% Precision, Software Synergy

  4.  
  5. 97% Efficiency, Integrated Cooling
  6.  
  7.  

Production Parameters

Parameter Unit Specification
Performance Parameters
Cooling Capacity kW 705
Cooling Capacity RT 200
Chilled Water Outlet Temperature °C 7
Input Power kW 111.5
Power Supply Capacity kW 134
COP kW/kW 6.32
IPLV – 8.86
Electrical Parameters
Power Supply – 380 V, 3-phase, 50 Hz
Starting Current A 2
Rated Current A 171
Maximum Current A 197
Compressor
Type – Liquid-suspended, variable-frequency centrifugal compressor
Quantity – 2
Evaporator
Type – Falling-film / flooded type
Water Flow Rate m³/h 121
Pressure kPa 55
Water Connection Size DN DN 150
Condenser
Type – Shell-and-tube type
Water Flow Rate m³/h 152
Pressure kPa 62
Water Connection Size DN DN 150

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Features

  1. 1.200 RT-Class Cooling Capacity, 705 kW Under Standard Conditions
    Standard-condition chilled-water outlet temperature 7°C, meeting 200 RT-class centralized cooling selection requirements.

  2. 2.Dual Liquid-Suspended Variable-Frequency Centrifugal Compressors
    Equipped with 2 liquid-suspended, variable-frequency centrifugal compressors, supporting variable-frequency operation and modulation, with a starting current of 2 A.

  3. 3.High-Efficiency Parameters
    Standard-condition COP 6.32 kW/kW and IPLV 8.86, with focus on full-load and part-load efficiency.

  4. 4.Falling-Film / Flooded Evaporator + Shell-and-Tube Condenser
    Evaporator water flow rate 121 m³/h, pressure drop 55 kPa; condenser water flow rate 152 m³/h, pressure drop 62 kPa; both water connections are DN150.

  5. 5.Compact Dimensions for Project Layout
    Overall dimensions 4185 × 1810 × 1980 mm; shipping weight 3640 kg; operating weight 4050 kg.

  6. 6.Standards Compliance and Pressure Customization Note
    Standard-condition parameters are based on GB/T 18430.1-2024; energy-efficiency evaluation is based on GB 19577-2024. Water-side design pressure is 1.0 MPa; requirements exceeding this pressure can be specified at the time of ordering.

Application Scenario 

The RCH-200E1JA is suitable for centralized air-conditioning or process cooling applications requiring 200 RT-class cooling capacity, such as commercial complexes, office buildings, hotels, hospitals, and industrial plants. Actual selection must be checked against project cooling load, chilled-water/cooling-water temperatures, flow rates, pressure drops, installation space, transportation conditions, and local energy-efficiency requirements.

FAQ

Q1: What is the cooling capacity of the RCH-200E1JA?
A: The standard-condition cooling capacity is 705 kW, corresponding to 200 RT.

Q2: What are the standard conditions?
A: According to GB/T 18430.1-2024, the chilled-water outlet temperature is 7°C, the cooling-water inlet temperature is 30°C, and the chilled-water and cooling-water flow rates are calculated using the coefficients stated in this document.

Q3: What is the water-side design pressure? What if it is exceeded?
A: The water-side design pressure of the evaporator and condenser is 1.0 MPa. If the project operating pressure exceeds 1.0 MPa, this must be specified when placing the order.

Q4: Can the parameters be used directly for final selection?
A: The parameters on this page are standard-condition parameters. Final selection must be confirmed based on project conditions, flow rates, pressure drops, installation, and transportation conditions. Product parameters may be revised due to updates.

 

--------------占位---------------

اترك رسالة
إذا كنت مهتمًا بمنتجاتنا وتريد معرفة المزيد من التفاصيل، فيرجى ترك رسالة هنا، وسنقوم بالرد عليك في أقرب وقت ممكن.

منتجات ذات صله

RCH-100E1JA Water-Cooled Refrigerant-lubricated bearing Centrifugal Chiller
RCH-100E1JA Water-Cooled Refrigerant-lubricated bearing Centrifugal Chiller

Product   Introduction The RCH-100E1JA is a high-efficiency, medium-capacity water-cooled chiller designed for demanding commercial and industrial applications. Delivering a robust cooling capacity of 355 kW (100 RT) at a standard chilled water outlet temperature of 7°C, it is an ideal central cooling solution for facilities requiring reliable, continuous operation

إقرأ المزيد
RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller
RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller

Product introduction The RCH-200E1JA chiller has a cooling capacity of 705 kW (200 RT) and a standard-condition chilled-water outlet temperature of 7°C. The unit adopts two liquid-suspended variable-frequency centrifugal compressors, a falling-film / flooded evaporator, and a shell-and-tube condenser. The COP is 6.32 and the IPLV is 8.86. The power supply is 380 V, 3-phase, 50 Hz; the starting current is 2 A, the rated current is 171 A, and the maximum current is 197 A. The water-side design pressure is 1.0 MPa. Both the evaporator and condenser water connections are DN150. The overall dimensions are 4185 × 1810 × 1980 mm, and the operating weight is 4050 kg. The parameters are based on the standard conditions of GB/T 18430.1-2024, and the energy-efficiency evaluation is based on GB 19577-2024.

إقرأ المزيد
RCH-400E1JA Water- Cooled refrigerant-lubricated bearing Centrifugal Chiller
RCH-400E1JA Water- Cooled refrigerant-lubricated bearing Centrifugal Chiller

Product Introduction The RCH-400E1JA is a 400 RT (1,407 kW) water-cooled centrifugal chiller designed for high-efficiency, stable operation in large HVAC and industrial process-cooling systems. It features a liquid-suspended variable-frequency centrifugal compressor, a falling-film / flooded evaporator, and a shell-and-tube condenser. Under standard conditions, it delivers COP 6.51 and IPLV 9.65, with a low starting current of 2 A and a compact footprint for easy project integration.

إقرأ المزيد
RCH-800E2JA Water-Cooled Centrifugal Chiller
RCH-800E2JA Water-Cooled Centrifugal Chiller

Product Introduction The RCH-800E2JA is a high-capacity water-cooled centrifugal chiller with a nominal cooling capacity of 2,814 kW (800 RT). It is equipped with two liquid-suspended, variable-frequency centrifugal compressors and is designed for large central cooling and process cooling applications. The unit features high efficiency, stable chilled-water outlet temperature control, and a compact overall design, making it suitable for demanding HVAC and industrial cooling systems.

إقرأ المزيد
RCH-1200 RT Water-Cooled Variable-Frequency Centrifugal Chiller
RCH-1200 RT Water-Cooled Variable-Frequency Centrifugal Chiller

Product Introduction This product is a 1200 RT (4,220 kW) water-cooled variable-frequency centrifugal chiller equipped with a liquid-suspended variable-frequency centrifugal compressor. Under standard conditions, the chilled-water outlet temperature is 7°C. The unit features large single-unit capacity, high energy efficiency, low starting current, and stable operation, making it suitable for large central air-conditioning systems and industrial process cooling applications. Its COP is 6.68 kW/kW and IPLV is 10.16, delivering strong energy-saving performance at both full load and part load.

إقرأ المزيد

اترك رسالة

إذا كنت مهتمًا بمنتجاتنا وتريد معرفة المزيد من التفاصيل، فيرجى ترك رسالة هنا، وسنقوم بالرد عليك في أقرب وقت ممكن.
إرسال

نحن المصدرة إلى

نحن المصدرة إلى

اترك رسالة

اترك رسالة
إذا كنت مهتمًا بمنتجاتنا وتريد معرفة المزيد من التفاصيل، فيرجى ترك رسالة هنا، وسنقوم بالرد عليك في أقرب وقت ممكن.
إرسال

وطن

منتجات

whatsApp

الاتصال